Warning: Illegal offset type in isset or empty in /home/content/p3pnexwpnas04_data01/95/2919595/html/wp-includes/class-wp-term-query.php on line 380

OUR GEAR

RENTAL GEAR
FILTER BY SUBCATEGORY

BUILD A LIST

0

Build a list of items and we will contact you to discuss pricing, availability, etc.

review list

Build a list ol items and we will contact you to discuss pricing, availability, etc. Build a list of items and we will contact you to discuss pricing, availability, etc. Build a list ot Items and we will contact you to discuss pricing, availability, etc.

Sony BVP-500

Features:

High performance – and stable, consistent performance

Dramatic simplification of PC board circuitry

Elimination of dozens of potentiometer controls (traditionally associated with camera video processing)

Reliability and stability over extended time periods

Reduction in maintenance and alignment

Cost reduction of total electronics

The high-technology Hyper HAD™ 1000 Imager increases the sensor aperture ratio, and the micro-lens system effectively converges the incident light onto each photo sensor. This endows the BVP-500 with a very high operational sensitivity – f8.0 at 2000 lux. With an F1.4 Lens at wide open aperture and +18dB master gain, full amplitude luminance video is achieved with only 7.5 lux scene illumination.

The 520,000 element array CCD, combined with Sony’s advanced sub-micron manufacturing techniques (which achieve a highly precise pixel spatial offset between the G and R/B imagers) and an optimized optical pre-filter, provides an outstanding horizontal 74% MTF at 400 TVL/ph, and limiting resolution of more than 900 TVL/ph.

The Sony CCD incorporates a novel variation on the traditional EVS system which utilizes electronic shuttering techniques to exercise unprecedented control over the built-in FIR cut filter within the imager’s readout mechanism. This in turn allows a smooth, variable elevation of vertical resolution. A specially designed optical low-pass filter minimizes any attendant inter-line flicker.

The carefully designed prism optics, improvements incorporated into shaping the CCD imager’s spectral response, and an optimized digital linear matrix – allow life-like color reproduction over a wide color gamut.

The Hyper HAD 1000 Imager has a high well capacity which elevates imaging capability at the upper extremity of light level – while the photosensors HAD technology dramatically lowers the dark current at the lower extremity. The combination of extending both boundaries endows this CCD with an unprecedented 600% effective dynamic range.

The BVP-500 features a variable speed electronic shutter (built into the CCD Imager) which allows superbly sharp image capture of fast moving objects. The shutter speed ranges 1/100, 1/125, 1/250, 1/500/, 1/1000, 1/2000 (sec).

This is another electronic shutter mechanism which allows the BVP-500 to image displays that are running at different scanning rates (such as displayed film images and computer displays) in a manner that eliminates the interference speed electronic shutter (built into the CCD Imager) which allows superbly sharp image capture of fast moving objects. The shutter speed ranges 1/100, 1/125, 1/250, 1/500/, 1/1000, 1/2000 (sec).

The use of the Hyper HAD 1000 Imager in the BVP-500 requires an extremely high sampling frequency of 18MHz. This high sampling frequency, in combination with an exclusive design of wideband optical low-pass filter, reduces aliasing to a level never achieved in conventional CCD cameras.

The Hyper HAD 1000 Imager structure lowers dark current by a factor of 10, providing almost invisible fixed pattern noise under high gain operation. Numerous refinements to the CCD sensor, and advanced electronic processing of the CCD output signal together achieve an excellent signal to noise ratio – 62dB typical.

Sony’s excellent techniques in CCD overload drain design provides superbly anti-blooming characteristics – even on the most severe of highlights. Total absence of blooming, comet-tailing, and image retention allow unprecedented new creative freedom in imaging – particularly in outdoor OB applications.

The novel structure of the Hyper HAD 1000 Imager significantly reduces vertical smear on highlights. Combined with the FIT transfer mechanism, such smear is now more than 140dB down on the highlight level – rendering it virtually invisible.

Input Connectors: MIC in XLR-3P (Female) x 2, phantom +48V or AB12VRef in BNC (with an optional standalone kit)DC in XLR-4P (Male, with an optional standalone panel, BKP-5910)RET control 6-pin

Output Connectors: Monitor: BNC type, 1.0Vp-p, 75 ohmsPrompter: BNC type, 1.0Vp-p, 75 ohmsVideo out: BNC type, 1.0Vp-p, 75 ohms (with an optional standalone panel, BKP-5910)Viewfinder connector: D-sub 25-pinScript: 4-pin, 5W/12VdcIntercom: XLR-5PAC utility out:ª Max. 200VA

Input/output Connectors: CCU: Kings typeLens: 36-pinVTR: 26-pin (with an optional standalone panel, BKP-5910)Tracker: 10-pinRemote 1: 8-pin (for RCP-700 series)Remote 2: 6-pin (for RM-P9)

Power Consumption: TBD

Operating temperature: -20 to +45°C (-4 to +113°F)

Storage temperature: -20 to +50°C (-4 to +122°F)

Pick-up Device System: Device configuration: 3-chip 2/3-inch IT CCD (16:9/4:3 Standard)Picture elements (total): 1038(h) x 504(v)

Optical Specifications: Spectrum system: Fl.4 prism systemBuilt-in filter wheel (Filter drive: Manual)Color filter-A: Cross FilterColor filter-B: 3200 °KColor filter-C: 4300 °KColor filter-D: 6300 °KND filter-1: CLEARND filter-2: 1/4 NDND filter-3: 1/16 NDND filter-4: 1/64 ND

Electrical Characteristic: Sensitivity: F8.0 at 2000 lx (3200 °K, 89.9% reflectance)Minimum subject illumination: 2 lux (Fl.4 lens, +30dB gain up)S/N ratio: 62dB (typical)Horizontal resolution: 900 TV linesVertical resolution: 400 TV lines/450 TV lines (w/ EVS or Super EVS)Geometric distortion: Below Measurable Level (w/o lens)Shutter speed selection: 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000Gain selection: -3dB,0dB, +3dB, +6dB, +9dB, +12dB, +18dB, +24dB, +30dBClear scan selection: 60.1 ~ 7000 HzExtended clear scan: 30.4 ~ 58.3 HzModulation depth (at 5mhz): 70%DC input range: 10.5 ~ 17 Vdc

General: Operating temperature: -20 to +45 °C (-4 to +113 °F)Storage temperature: -20 to +50 °C (-4 to + 122 °F)

Pick-up Device System: Device configuration: 3-chip 2/3-inch IT CCD (4:3 Standard)Picture elements (total): 1038(h) x 504(v)

Optical Specifications: Spectrum system: Fl.4 prism systemBuilt-in filter wheel (Filter drive: Manual)Color filter-A: Cross FilterColor filter-B: 3200 °KColor filter-C: 4300 °KColor filter-D: 6300 °KND filter-1: CLEARND filter-2: 1/4 NDND filter-3: 1/16 NDND filter-4: 1/64 ND

Electrical Characteristic: Sensitivity: F8.0 at 2000 lx (3200 °K, 89.9% reflectance)Minimum subject illumination: 2 lux (Fl.4 lens, +30dB gain up)S/N ratio: 62dB (typical)Horizontal resolution: 900 TV linesVertical resolution: 400 TV lines/450 TV lines (w EVS)Geometric distortion: Below Measurable Level (w/o lens)Shutter speed selection: 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000Gain selection: -3dB,0dB, +3dB, +6dB, +9dB, +12dB, +18dB, +24dB, +30dBClear scan selection: 60.1 ~ 7000 HzModulation depth (at 5mhz): 70%DC input range: 10.5 ~ 17 Vdc

General: Operating temperature: -20 to +45 °C (-4 to +113 °F)Storage temperature: -20 to +50 °C (-4 to + 122 °F)

Pick-up Device System: Device configuration: 3-chip 2/3-inch IT CCD(4:3 Standard)Picture elements (total): 1038(h) x 504(v)

Optical Specifications: Spectrum system: Fl.4 prism systemBuilt-in filter wheel (Filter drive: Manual)Color filter-A: Cross FilterColor filter-B: 3200 °KColor filter-C: 4300 °KColor filter-D: 6300 °KND filter-1: CLEARND filter-2: 1/4 NDND filter-3: 1/16 NDND filter-4: 1/64 ND

Electrical Characteristic: Sensitivity: F8.0 at 2000 lx (3200 °K, 89.9% reflectance)Minimum subject illumination: 2 lux (Fl.4 lens, +30dB gain up)S/N ratio: 62dB (typical)Horizontal resolution: 680 TV linesVertical resolution: 400 TV lines/450 TV lines (w EVS or Super EVS)Geometric distortion: Below Measurable Level (w/o lens)Shutter speed selection: 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000Gain selection: -3dB,0dB, +3dB, +6dB, +9dB, +12dB, +18dB, +24dB, +30dBClear scan selection: 60.1 ~ 7000 HzModulation depth (at 5mhz): 70%DC input range: 10.5 ~ 17 Vdc

General: Operating temperature: -20 to +45 °C (-4 to +113 °F)Storage temperature: -20 to +50 °C (-4 to + 122 °F)

Input signals: Return video 1,2 (*13,4)(BNC, loop-through)Reference in (BNC, loop-through)Prompter in (BNC, loop-through)

Output signals: Encoded video out (BNC) x 3Component SDI (BNC) x 2 (option)R/G/B out (BNC)Y/R-Y/B-Y out (BNC)Waveform monitor out (BNC) x 2Picture monitor out (BNC) x 2Character video out (BNC)Sync out (BNC)MIC out (2-CH, XLR 3-PIN)

Input/output signals: Camera: Triax (Kings type)Coax (BNC)

Communications: Intercom (RTS)(XLR 3-PIN, loop-through)Intercom (4W/2W)/Tally/PGM (19-PIN)Intercom/PGM (front panel)(XLR 5-pin)

Remote control: REMOTE (8-pin)AUX (8-PIN)

Others: WF MODE (4-PIN)MIC gain remote control(D-sub 15-PIN)Intercom remote control(D-sub 25-PIN)

Power Requirements: AC 120V, 50/60Hz

Power consumption: 450VA

add to review list

SEND A MESSAGE

locations

  • Clearwing Productions - WI

    Wisconsin 414 258 6333
    11101 W.Mitchell St.
    Milwaukee, WI 53214

  • Clearwing Productions - AZ

    Arizona 602 850 6333
    5640 S. 40th Street #1
    Phoenix, AZ 85040

Request Quote